Showing posts with label controller. Show all posts
Showing posts with label controller. Show all posts

Monday, September 7, 2015

SNES to NES Controller Adapter

Historically, the SNES was originally intended to be backward compatible with the NES, with a CPU from the same 6502 lineage as the NES and a similar controller signal protocol over the same 5 wires: data clock, data latch, serial data, +5v and ground. The SNES signal has more data clock pulses after the data latch pulse but the protocols are the same, otherwise. This means that if you make a pin-to-pin adapter that sends SNES controller signals to an NES port, everything works just fine and the NES will just ignore the extraneous clock pulses.

Now, original NES controllers are getting fairly expensive these days--particularly the "dog bone" controllers that are round instead of pointy--and the third party reproductions from Tomee et al. are pretty universally reviled for being flimsy, unresponsive and altogether crummy. SNES controllers, on the other hand, are more ergonomic, originals are generally more plentiful and some of the repros (like this one) are actually pretty great. I also already have a bunch of SNES controllers, including an ASCII Pad, which is possibly the finest third party controller ever produced...

So, with all of that in mind, I cobbled together an SNES to NES controller adapter (there are a number of guides online, see also: here and here, among others) using a couple of cheap extension cables, specifically Tomee NES extensions (I found a set of 2 from an eBay seller for $9) and "Gen" 2-pack SNES extensions. I'll post which wires I connected, but it seems the factories that produce these extension cables just pick a handful of randomly colored wires when they put them together, so don't assume they'll apply to your own cables in any logical way:
NES side   |   SNES side 
  Yellow  <->  Black 
  Orange  <->  Green 
   Black  <->  Red 
    Blue  <->  Yellow 
   Green  <->  White
Ideally, you would figure out which wire carries which signal using a multimeter but mine is on the fritz, so I just trial-and-errored my way through it, which was a pain in the ass, but whatever. It worked in the end. Interestingly and unexpectedly, NES' B-button becomes the SNES' Y-button, and NES A becomes SNES B, which is really fantastic, since the angle of the SNES B and A buttons would make them hard to press at the same time had the naming/mapping been consistent.

Friday, August 22, 2014

Tomee SNES Retro Controller Review

I've been re-acquiring some old gaming consoles lately and it seems official SNES controllers are getting pretty expensive these days, commanding $15-20 at the time of this writing. I already had one official controller but wanted to get a second controller on the offhand chance anyone wanted to play a 2-player game. I wasn't too keen on paying the full price for an official one, so figured I'd try out the Tomee SNES controllers, which are super-cheap and readily available (i.e., no eBay; I got a 2-pack for ~$7 on Amazon).
To be clear: at a price of $3.50 each, these controllers are totally worth the money. They're functional and have a look and feel that's reminiscent of the official SNES controllers. I plugged them up and was able to play games just fine.

However, the plastic feels a bit flimsy and the d-pad is shaped a bit differently from the official Nintendo controller's (it's significantly fatter than the Nintendo version; Nintendo on top, Tomee below):
The four face buttons are also slightly different size and sit taller, though that's a pretty minor issue, IMO (Tomee on the left, official Nintendo on the right; the pic's blurry because my camera kept focusing on my hand instead of the controllers...):
The L/R buttons are significantly sharper-edged and clickier, though they rarely get used in games anyway, so it's also not a big deal. Perhaps more important is the fact that the Tomee controllers are thicker/fatter and don't taper the way Nintendo controllers do, which messes with the overall feel and ergonomics quite a bit (official Nintendo on the left, Tomee on the right):
The start/select buttons are much mushier than the official controller's and they're extremely prone to getting wedged under the controller face, which is more annoying than detrimental. Both of my d-pads also have an odd quirk whereby pressing down-left with a bit too much force will trigger all directions simultaneously. This can have some pretty hilarious results in games that weren't programmed to expect it, lol.

Overall, I think these controllers are a great value for someone who wants to do some casual playing or, in my case, just wants a second controller on-hand for the rare occasion that a friend/guest wants to throw down on some multiplayer action. If you're serious about your gaming, though, you'll want to have an official controller, which is more reliable, more comfortable and built to last.

If you're planning to use an SNES-to-USB adapter to use a real controller with an emulator, I suggest looking instead at the Buffalo Classic USB Gamepad, the price of which varies from around $12-20. This controller feels significantly more solid than the Tomee and actually feels extremely similar to a new official Nintendo SNES controller in weight and button-feel. Here's a (shitty) picture of mine next to one of the Tomees for comparison:

Cari Farmasi

Farmasi Di Kuala Lumpur dan Selangor Selangor / KL Area NO SHOPS NAMES ...