Based on Sprint's depressingly slow release of Gingerbread OTA (over the air) updates for the Epic 4G (aka Samsung Galaxy S SPH-D700), it looks like this phone will be considered EOL (end of life) in the very near future, despite being barely a year old (that's like, what... 7 years in cell phone time?). It is, therefore, very unlikely that us Epic owners will ever receive an official update to Android 4.0 Ice Cream Sandwich.
However, thanks to the open source nature of Android and some extremely clever community members, we can now use the awesome, fast, feature-filled Cyanogen Mod (CM) on our phones. CM7 has only just recently reached 'supported' status on the Epic 4G, while international versions of the phone have had support for some time.
Preparation
To get started, we need to download some tools:
1. Odin, which is a Windows-only (boo) utility for flashing firmwares on the Epic 4G. Mac/Linux users can try Heimdall, but I won't be covering that in this tutorial.
2. A rooted kernel for Samsung's official Gingerbread ROM. This will prep your phone for all of the shenanigans we'll be getting into. It also includes some nice community-provided goodies, like a fix for the keyboard's habit of dropping double-tapped letters.
3. ClockworkMod, a special bootloader that now works with the Epic 4G. Once you get this guy installed, you never have to use your computer for this kinda stuff again. You can just flash in new ROMs (like CM updates) directly from your phone's SD card.
4. A Cyanogen Mod image optimized for the Epic 4G. This is the one I used, but since then, the epicmtd (the codename for the Epic 4G) has become an officially supported device! That means you can always get the latest stable and/or nightly builds from the official CM distribution source. One thing to be aware of: CM10 requires repartitioning your phone, so once you go to it, you can't go back to CM9/ICS or earlier without returning to stock first. As long as you stay with CM9 or earlier, however, you can swap between them without doing a full reversion.
5. Samsung's USB Phone Drivers. Without this driver, Odin will fail to see your phone :(
6. G-Apps. They're named in this fashion: gapps-[android revision]-[date]-signed.zip. Find the one that matches your CM version (ICS corresponds to CM9 while JB corresponds to CM10) and has the most recent date.
You'll also need a USB-A-to-microUSB cable that is SHORTER than the one that came with your phone. For some strange reason that I won't go into here (it has to do with impedance of the wire :O), the 6-foot cable that is shipped with the phone will almost always fail the process, leaving you with a semi-bricked phone. Get one like this instead.
Ok, once you've collected all of your tools, we can get started.
Installation
1. Install your USB Phone Driver and unpack your Odin zip file. Inside the resulting folder, you should have your Odin executable (ends in *.exe), Odin3.ini and a *.pit file (mine is victory_8G_100528.pit).
2. Plug your USB-A-to-microUSB cable into your computer, but not into your phone. Now, power off your phone, slide open your phone's keyboard and hold down the number 1 key and the power button while plugging in the microUSB cable. It should boot into this screen:
3. Now, open Odin. It should look something like this:
Make sure, under 'Option' on the left, the box next to 'Re-Partition' is NOT checked. Then, on the right, click the button labeled PDA and navigate to your Samsung recovery ROM (#2 in the tools above). Choose it and, back in the main window, click the big button labeled 'Start.'
Some messages should run through the window on the bottom left of the Odin window and, if everything went well, it should end up like this:
and your phone should reset itself and boot into the Samsung ROM.
4. Now, power off your phone again, unplug it from your computer and perform step #2 again to get it back into the recovery state.
5. Back in Odin, click the PDA button again, but this time, navigate to the ClockworkMod ROM (#3 from the tools above). Choose it and, back in the main window, click the 'Start' button again. The message window in the bottom-left of the menu should cycle some more messages and, if everything went well, it should say All threads completed. (succeed 1 / failed 0) and your phone should reset itself again.
At this point, we're finished with Odin (forever), so go ahead and close it out.
6. From now on, you can flash anything you want directly from your SD card, which is awesome. So, put your phone into USB Mass Storage mode (I had to unplug my USB cable and then reconnect it, then it prompted me as usual) and drag your CyanogenMod ROM (#4 from the tools above) to the root (top level directory) of your SD card and rename it to 'update.zip' (very important).
Now, on your phone, tap the button labeled "Disconnect storage from PC" to unmount it from your computer and power-off your phone. Once it's completely turned off, power it back on, but when you do, press and hold the power button, the camera button (i.e., the button below the power button) and the 'Volume Down' button on the other side of your phone to enter the ClockworkMod bootloader. It should look something like this:
Using the volume up/down button to navigate, select 'Apply sdcard:update.zip.' It will ask for confirmation and warn you that it cannot be undone. Confirm your selection and it will begin installation, which should look like this:
When it's all finished, it will put you back in the bootloader, where you can choose 'Reboot system now':
If everything went well, you should see the CyanogenMod7 boot screen, like this:
Congratulations! Take a deep breath and give yourself a pat on the back. We just have a few more things to add and then we'll be done! You can proceed to step #7.
If you just keep seeing the CyanogenMod7 boot screen over and over (like I did), then you've encountered the "bootloop" error, which is no big deal. Just boot back into your ClockworkMod bootloader, choose 'Mounts and Storage' from the main menu, and then 'mount USB storage' (you may have to unplug/replug the USB cable from your computer if it doesn't recognize it straightaway). Once it mounts on your computer, you can try to redownload your CyanogenMod image, rename it to update.zip and replace it on the root of your SD card. When it's done copying, select 'Unmount,' tap the 'back' button to go back to the bootloader, select 'wipe data/factory reset' and then flash it again to CM.
7. Once you successfully reach the CM desktop, activate USB Mass Storage mode via the pulldown main menu. Once your SD card mounts on your computer, create a new folder in the root directory (you can call it whatever you want, but I'm going to call it 'updates'). Note: you can also delete your CM image at this point, if you want to free up the space. Put your G-Apps into your new directory and boot back into your ClockworkMod recovery.
Once you're there, choose 'Apply update from zip file on SD card,' then 'choose zip from SD card,' then navigate to your newly created directory ('updates' for me) and choose your gapps zip. When it finishes, choose 'Reboot' from the bootloader and you should be all set!
Whenever new updates for CyanogenMod are released, simply rename them to 'update.zip' and place them on the root of your SD card, then run the update from ClockworkMod's bootloader. < Note: since this was written, you can update straight from CyanogenMod without using ClockworkMod by going to System Settings > About phone > CyanogenMod updates. Here, you can browse and download updates and apply them on the next reboot.
